4000 Count AC/DC Clamp Meter

Availability: In stock
SKU
ACM-3343
acdca
acdcv
degreeC
degreeF
mhz
nf
uf
uf
LowBattery
autooff
autopolarity
datahold
Battery
Subtotal: 0

This ACM-3343 4,000 Count AC/DC Clamp Meter has an LSI circuit providing high reliability and durability. High internal impedance assures minimum measuring error with overload protection provided for all ranges. It has an impact-resistant ABS plastic housing with soft touch non-slip rubber and mid-size teardrop shaped jaws which give easy access into confined trunking.

  • 25mm display with function indicators and backlight
  • Auto polarity indicator
  • Push button zero adjust
  • Continuity buzzer and diode check
  • Max hold
  • Data hold freezes displayed readings
  • Overload protection circuit for all ranges
  • Temperature °C and °F
  • Low battery indication
  • Auto power off after 35 minutes of no activity
  • Supplied with 2 test leads, K-Type temperature bead probe and batteries
Function Range Basic Accuracy Max Resolution
DC Current 1000A ±(2.8%+10digits) 1mA
AC Current 1000A ±(3%+10digits) 10mA
DC Voltage 600V ±(0.8%+3digits) 0.1mV
AC Voltage 600V ±(1.5%+3digits) 0.1mV
Resistance 40MΩ ±(1%+4digits) 0.1Ω
Capacitance 100nF ±(5%+100digits) 0.01nF
Frequency 100KHz ±(1.5%+5digits) 0.001Hz
Duty Cycle 99.9% ±(1.2%+2digits) 0.1%
Temperature 1000°C ±(3%+5digits) 0.1°C
Power 1 x 9V PP3 alkaline battery. (LR-61)
Dimensions 229 x 80 x 49mm
Weight 303g

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (Clamp Meter)
Issued at 5 points: Volt d.c, Volt a.c,  Amps d.c,  Amp a.c, Ohms - Call For Details
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
UKAS Calibration (Clamp Meter)
Issued at 5 points: Volt d.c, Volt a.c,  Amps d.c,  Amp a.c, Ohms - Call For Details

A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.

Write Your Own Review
You're reviewing:4000 Count AC/DC Clamp Meter
Phone

Contact our Sales Team

Our sales team are always happy to help on 01530 566800

Sports

Free Technical Support

Call our Technical Support Team on 01530 566804

Secure

Secure payments

Safe and Secure payments via our secure checkout

Delivery

Next Day Delivery

Next day delivery as standard on all our orders