1000A AC/DC Clamp Meter (True RMS)

Availability: In stock
Grouped product items
Product Name Qty
Special Price £70.88 Regular Price £78.75
Subtotal: 0

This professional true RMS clamp meter provides AC current and AC/DC voltage readings regardless of waveforms. They are ideal for industrial and commercial applications where non-linear loads distort the current or voltage waveform. Combining high reliability and durability, overload protection is provided for all ranges. The clamp meter has an impact-resistant ABS plastic housing with soft touch non-slip rubber and mid-size teardrop-shaped jaws which give easy access into confined trunking.

  • 25mm display with 41 segment bargraph, function indicators and backlight
  • Auto polarity indicator
  • Continuity buzzer and diode check
  • Peak hold
  • Data hold freezes displayed readings
  • Overload protection circuit for all ranges
  • Temperature °C and °F
  • Low battery indication
  • Auto power off after 20 minutes of no activity
  • Supplied with 2 test leads, K-Type temperature bead probe and battery
Function Range Basic Accuracy Max Resolution
AC Current 1000A ±(2.8%+10digits) 10mA
DC Voltage 600V ±(0.8%+2digits) 0.1mV
AC Voltage 600V ±(1%+10digits) 0.1mV
Resistance 40MΩ ±(1%+4digits) 0.1Ω
Capacitance 40mF ±(5%+30digits) 0.01nF
Frequency 4KHz ±(1.5%+2digits) 0.01MHz
Temperature 1000°C ±(2.5%+3digits) 0.1°C
Power 1 x 9V PP3 alkaline battery. (ALR-61)
Dimensions 229 x 80 x 49mm
Weight 303g

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (Clamp Meter)
Issued at 5 points: Volt d.c, Volt a.c,  Amps d.c,  Amp a.c, Ohms - Call For Details
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
UKAS Calibration (Clamp Meter)
Issued at 5 points: Volt d.c, Volt a.c,  Amps d.c,  Amp a.c, Ohms - Call For Details

A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.

Write Your Own Review
You're reviewing:1000A AC/DC Clamp Meter (True RMS)

Contact our Sales Team

Our sales team are always happy to help on 01530 566800


Free Technical Support

Call our Technical Support Team on 01530 566804


Secure payments

Safe and Secure payments via our secure checkout


Next Day Delivery

Next day delivery as standard on all our orders