6000 Count Digital Multimeter

Availability: In stock

SKU

ADM-930

Grouped product items
Product Name	Qty
6000 Count Digital Multimeter £45.00
Multimeter Calibration Certificate (Traceable) £65.00
Multimeter Calibration Certificate (UKAS) £82.00
9V PP3 Alkaline Battery £3.25

Subtotal: 0

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

The ADM-930 digital multimeter is suitable for use by electricians, electronic engineers, general industry and laboratories. They are EN61010-1 CAT III 600V, CATII 1000V rated. A large high-contrast LCD display, a single positive action rotary selection and only 4 function buttons make them easy to use.

Impact-resistant rubber and ABS plastic case with a flip out desk stand
34mm LCD display with large digits, 61 segment bargraph and function indicators with backlight
Measuring rate of 2 times per second
Auto polarity indication
Auto ranging with range hold
Data hold
Min/max recording mode
Fast blow fuse for overload protection
Operating environment 0°C to 50°C at <70%RH
Auto power off
Low battery indication
Supplied with soft zip carry pouch, 2 test leads and battery

Technical Specification

Function	Range	Basic Accuracy	Max Resolution
DC Voltage	1000V	±0.5% of rdg ± 2 digits	0.1mV
AC Voltage	1000V	±1.2% of rdg ± 3 digits	1mV
DC Current	10A	±2.5% of rdg ± 5 digits	1mA
AC Current	10A	±3% of rdg ± 5 digits	1mA
Resistance	60MΩ	±1.2% of rdg ± 4 digits	0.1Ω
Capacitance	4000µF	±5% of rdg ± 50 digits	10pF
Frequency	10MHz;	±1.5% of rdg ± 5 digits	0.001Hz
Diode Test	Open circuit voltage 1.5V DC typical;test current 0.3mA
Continuity	Theshold <100Ω
Dimensions	150 x 70 x 48mm
Weight	255g

Calibration Options

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (Multimeter)
Issued at 3 points - Contact Us for Details

Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.

Traceable Calibration (UKAS)
Issued at 3 points - Contact Us for Details

A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.

Product Download