Humidity & Temperature USB Data Loggers with LCD Display
EL-USB-2LCD Software
EL-USB-2LCD Summary Report
Roll over image to zoom in
Humidity & Temperature USB Data Loggers with LCD Display
EL-USB-2LCD Software
EL-USB-2LCD Summary Report

Humidity & Temperature USB Data Loggers with LCD Display

SKU: AEL-USB-2LCD
filler

Highly Recommended: The AEL-DataPad allows users of AEL-USB data loggers to configure loggers, download data, and view logging results on-the-spot, rather than removing the logger from the environment being measured and taking it to a PC.

Description

Temperature/humidity data loggers with over 16,382 readings capacity on each channel. Simple download of the stored data directly to your PC or laptops USB port. Ideal to monitor, record and store temperature & humidity conditions in controlled environments, laboratories, clean rooms, storage and other critical areas. IP-67 Rated.

  • -35° to 80°C x 0.5°C
  • 0% to 100%RH x 0.1%RH
  • Hi-contrast LCD display for min/max and last value and can be set on/off or auto power off
  • USB interface for set-up and data transfer to PC or laptop
  • Set-up allows the user to select logging rate, start time, alarm limits and logging mode
  • User selectable logging intervals – min 10 secs, max 12 hours
  • Logs up to 16,382 temperature & 16,382 humidity readings
  • Green LED for logging confirmation
  • 2 programmable alarm thresholds (high/low)
  • Red LED if alarm limits exceeded
  • Analysis software with graphical display of data – total readings, zoom facility to individual readings, dew point calculation and visual indication of alarm levels
  • Supplied with wall bracket, software and battery

Technical Specification

  Temperature Humidity
Range -35° to +80°C 0% to 100% RH
Resolution 0.5°C 0.5% RH
Accuracy ±2°C
±3%RH
Power 3.6V ½AA lithium battery (SB-AA02) typical 1year
Dimensions 126 x 25 x 24mm
Weight 60g

Calibration Options

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (Temperature / Humidity) Price
Issued at 4 points: 20°C & 30°C (Temp)
35% & 75% @ 20°C (Humidity)		 £80.00
Additional points available from: From 0°C to 50°C
From 30% to 95%RH		 £5.00 (Temp)
£15.00 (Humidity)
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
Traceable Calibration (Temperature / Humidity) Price
Issued at 5 points: 2 x Temp; 20°C & 30°C (Temp)
3 x %RH; 35%, 55% & 75% @ 20°C 		£88.00
Additional points available from: From 0°C to 50°C
From 30% to 95%RH		 £5.00 (Temp)
£15.00 (Humidity)
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
UKAS Calibration (Temperature / Humidity) Price
Issued at 4 points: 20°C & 30°C (Temp)
35% & 75% @ 20°C (Humidity)		 £116.40
Additional points available from: 5°C to 50°C / 25% to 95%RH £10.00 (Temp)
£25.00 (Humidity)

A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.

Product Videos

Product Downloads

You may also like

Recently viewed