The AET-175 is a compact and easy-to-use dual channel data logger for efficient monitoring and data collection of temperature and humidity values. Ideal for monitoring food, medical product storage, warehousing and distribution, containers, industrial processes, laboratory environments, museums and libraries.
-40° to 70°C x 0.1°C
0% to 100%RH x 0.1%RH
Measures °C or °F
USB interface for set-up and data transfer to PC or laptop
Set-up allows the user to select logging rate, unit of measurement, recording settings, alarm limits and to enable & disable LEDs
User selectable logging intervals – From 1 second up to 24 hours
Logs up to 16,350 temperature and 16,350 humidity readings
Green LED for logging confirmation
2 programmable alarm thresholds (high/low)
Red LED if alarm limits are exceeded
Large 29mm LCD display for time and date changes between the date & time every 10 secs and current readings
Min/max values and logger full indicator
Low battery indication
Impact-resistant ABS and rubber moulded case, wall holder and padlock
Windows software with graphical display of data – total readings, zoom facility to individual readings, visual indication of alarm levels, summary of data logging settings & readings and data list of results
Readings downloaded can be exported to a Microsoft Excel spread sheet
Supplied with wall holder, padlock, software, USB cable and battery
A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.
Traceable Calibration (Temperature / Humidity)
Issued at 4 points:
20°C & 30°C (Temp) 35% & 75% @ 20°C (Humidity)
Additional points available from:
From 0°C to 50°C From 30% to 95%RH
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
UKAS Calibration (Temperature / Humidity)
Issued at 4 points:
20°C & 30°C (Temp) 35% & 75% @ 20°C (Humidity)
Additional points available from:
5°C to 50°C / 25% to 95%RH
A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.
