2000 Count Digital Multimeter (Manual Ranging)

SKU: ADM-920


The ADM-920 digital multimeter is suitable for use by electricians, electronic engineers, general industry and laboratories. It is EN61010-1 CAT III rated with 2000 counts.

  • Manual ranging 2000 counts
  • Impact-resistant rubber and ABS plastic case with a flip-out desk stand
  • Single positive rotary selection
  • Measuring rate of 2 times per second
  • 34mm LCD display with large digits
  • Auto polarity indication
  • Fast blow fuse for overload protection
  • Low battery indication
  • Supplied with soft zip carry pouch, 2 test leads and battery

Technical Specification

Function Range Basic Accuracy
DC Voltage 600V ±0.5%
AC Voltage 600V ±1.2%
DC Current 10A ±2.5%
Resistance 2MΩ ±0.8%
Diode Test Open circuit voltage 2.8V DC typical;test current 1mA
Continuity Theshold 30Ω
Dimensions 150 x 70 x 48mm
Weight 255g

Calibration Options

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (Multimeter) Price
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
Traceable Calibration (UKAS) Price

A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.

Product Downloads

You may also like

Recently viewed