The AHTD-625 A high accuracy combined humidity and air temperature meter with wet bulb and dew point temperatures. Ideal for a wide range of industrial and laboratory applications. Suitable for single handed operation.
-30° to 100°C x 0.1°
0% to 100%RH x 0.1%
Displays temperature in °C or °F
Dew point and wet bulb temperatures displayed at the touch of a button
Sampling rate of 2.5 samples per second
43mm LCD dual display with backlight
Connected probe with 1.8m coiled cable
Probe mounting clip allows single handed use
Data hold freezes displayed measurements
Measure Modes; Current, Min or Max
Low battery indication
Auto power off – adjustable from 1 to 120 minutes – can be user disabled
Impact-resistant ABS case with rubber boot and flip-out desk stand
Supplied with carry bag and strap, rubber boot and battery
A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.
Traceable Calibration (Temperature / Humidity)
Issued at:
35% & 75% RH @ 20°C
Additional points:
Please call for details
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
UKAS Calibration (Temperature / Humidity)
Issued at:
35% & 75% RH @ 20°C
Additional points available from:
Please call for details
A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.
