USB Datalogging Coating Thickness Meter

Availability: In stock

SKU

ADT-156H

Grouped product items
Product Name	Qty
USB Datalogging Coating Thickness Meter £165.00
Thickness Meter Calibration Certificate (Traceable) £68.00

Subtotal: 0

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

The DT-156H Coating Thickness Meter combines magnetic induction and eddy current technologies to measure coating thicknesses on ferrous and non-ferrous metal substrates with high precision. Its integrated sensor automatically identifies the base material, allowing seamless measurement of paint, zinc, anodising layers and more. With an intuitive interface, users can choose between continuous or single measurement modes.

The device features statistical display of maximum, minimum, and average values, and stores up to 1500 readings for later review. The USB interface allows easy data export to a PC or laptop, facilitating accurate reporting and analysis.

Each unit is supplied with ferrous and non-ferrous base plates, calibration foils, USB cable, software, batteries, and a protective carry case. Calibration certificates for both the instrument and foils are available for traceability and quality assurance.

Measures both magnetic and non-magnetic coatings
Automatic substrate recognition
Dual units: microns and millimetres
USB interface for data logging
Suitable for small radius substrates
Large memory for 1500 measurements
Comes complete with calibration tools and software

Technical Specification

Measurement Range: 0 to 1,350μm
Resolution: 0.1μm (low range), 1μm (high range)
Accuracy: ±2.5% +2μm
Minimum Measuring Area: 7mm (ferrous), 5mm (non-ferrous)
Minimum Base Thickness: 0.5mm (ferrous), 0.3mm (non-ferrous)
Measurement Units: Microns and millimetres
Power Supply: 2 x 1.5V AAA alkaline batteries (LR-3-2)
Dimensions: 113.5 x 54 x 27mm
Weight: 100g
Data Memory: Stores up to 1500 readings
Connectivity: USB interface for PC/laptop connection
Curved Substrate Capability: 1.5mm radius (ferrous), 3mm radius (non-ferrous)

Calibration Options

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (Meter only CAL-TA)
Issued at 8 points: Between 25µm and 740µm

Traceable Calibration (Foils only N-1002X)
Issued at up to 8 points: Between 25µm and 740µm

Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.

Product Download