Thermocouple Data Logger with USB interface
Thermocouple Data Loggers with USB Interface
Thermocouple Data Loggers with USB Interface Report
Roll over image to zoom in
Thermocouple Data Logger with USB interface
Thermocouple Data Loggers with USB Interface
Thermocouple Data Loggers with USB Interface Report

Thermocouple Data Loggers with USB Interface

SKU: AEL-USB-TC
filler

Description

The AEL-USB-TC data logger measures and stores over 32,510 temperature readings for a K, J or T-Type thermocouple temperature probe. Simple download of the stored data directly to your PC or Laptops USB port. The AEL-USB-TCLCD has a high-contrast display with user selection of current temperature, maximum temperature or minimum temperature.

  • -200° to 1350°C x 1°
  • Accepts a K, J, or T-Type thermocouple temperature probe with the standard mini plug
  • USB interface for set up and data transfer to PC or Laptop
  • Set-up allows the user to select thermocouple type, logging rate, start time, alarm limits and logging mode
  • User selectable logging intervals – Min 1 sec, Max 12 hours
  • Green LED for logging confirmation
  • 2 programmable alarm thresholds (high/low)
  • Red LED if alarm limits exceeded
  • Analysis software with graphical display of data – total readings, zoom facility to individual readings and visual indication of alarm levels
  • Supplied with software, K-Type thermocouple 1.3m cable with 100mm x 3mm immersion probe (0°C to 400°C) and battery

Technical Specification

Range: -200° to +1350°C (K-Type), -200° to +1190°C (J-Type),
-200° to +390°C (T-Type)
Resolution: 0.5°C
Accuracy: ±1°C (-10° to +40°C) ±2°C others
Logging Rate: From 1 sec up to 12 hrs (user selectable)
Max Readings: 32,510 data sets
Dimensions: 118 x 27 x 26mm
Power: 1 x 3.6V ½AA lithium battery (SB-AA02) typical 6 months
Weight: 39g

K-Type Probes

View our selection of thermocouple probes. From penetration to surface probes we have a selection available in K, J, E, T, R, S, & N Type.

Calibration Options

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (K-Type Unit Only) Price
Issued at 9 points: -20°C, 20°C, 50°C, 100°C, 200°C,
300°C, 400°C, 500°C, & 1000°C
£50.00 (1 Input)
£60.00 (2 Inputs)
£75.00 (3 Inputs)
Additional points: From -200 to 1260°C
£5.00 per point
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
Traceable Calibration (K-Type System - Unit + 1 Probe) Price
Issued at 4 points: 25, 50, 100, & 140°C
£65.00
Additional points: From -20 to 255°C
£5.00 per point
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
UKAS Calibration (K-Type System - Unit + 1 Probe) Price
Issued at 4 points: 25, 50, 100, & 140°C
£75.00
Additional points: -20 to 255°C
£10.00 per point

A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.

Product Videos

Product Downloads

You may also like

Recently viewed