Temperature, Humidity & Pressure USB Data Logger

SKU: AEL-SIE6+
filler
No Software to Install!

The EL-SIE-6+ is designed for quick and easy use with no complicated software to download and install. All essential software is contained within the unit itself, all you need is a PC or Mac, a USB cable (included) and a browser. You don't even need an active internet connection!


Description

Monitor the environment you live and work in with the EasyLog EL-SIE-6+. Configuration is simple, with no software to install on your PC or Mac – just connect the logger with a USB cable, and use your standard web browser to configure the device for logging. You don’t even need internet access to set up and use the EL-SIE-6+, it really couldn’t be easier.

The logging interval can be set between 10 seconds and 24 hours, with immediate, delayed, triggered or push-to-start logging. Alarms are fully user configurable, with functionality including cumulative alarms, pre-alarms, a delay before alarm triggering, and an alarm hold option, which continues showing the alarm condition even if the reading returns to an acceptable level. The display shows current, maximum and minimum readings, and three coloured LEDs indicate device status at a glance.

Once logging is complete, re-connect to your computer and use your browser to view, analyse and save your data. You can also choose to upload your data to an Easy Log Cloud account, making the data accessible online for powerful graphing, analysis and report generation.

Typical battery life is over 1 year using standard AAA alkaline batteries, and a wall mounting bracket is supplied with the device.

  • -18 to +55°C (-0.4 to +131°F) temperature measurement range
  • 0 to 100%RH humidity measurement range
  • 300 to 1200mbar pressure measurement range
  • Stores over 1,000,000 readings (As per spec table)
  • No software to install - configure using your normal web browser
  • Use with a PC or Mac
  • Display shows current, maximum and minimum readings
  • Status and alarm indicators
  • On-board alarm sounder
  • Data can be uploaded to the EasyLog Cloud

Technical Specification

Temperature Range -18 to +55°C (-0.4 to +131°F)
Resolution 0.01°C
Accuracy ±0.2°C (±0.36°F) typical
Long Term Stability <0.03°C (<0.054°F) / year
Humidity Range 0 to 100%RH
Resolution 0.1%
Accuracy ±1.5% typical (0 to 80% RH)
Dew Point Accuracy 1.5°C typical (40 to 100%RH)
Long Term Stability <0.25%RH / year typical
Pressure Range 300 to 1200mbar
Resolution (Data) 0.01mbar
Resolution (Display) 0.1mbar
Accuracy ±1mbar
Response Time Less than 10 seconds
Long Term Stability ±1mbar
Measurement Units °C, °F or K, %RH, Dew Point, mbar, hPa, mmHg, inHg, psi
Logging Rates 10 seconds to 24 hours, user selectable
Start Modes Immediate, push to start, delayed start, parameter triggered
Memory Capacity Over 1,000,000 total readings, >500,000 readings per channel
Sounder Integrated alarm sounder
Power Source 2 x AAA 1.5V battery
Battery Life >1 year (at 25°C with 10 minute logging rate)
Dimensions 93 x 42 x 17 mm (excluding bracket)
Operating temperature range -18 to +55°C (-0.4 to +131°F)
Environmental rating IP4X

No Complicated Software

All the software needed to configure your EL-SIE-6+, and view and analyse the data it logs, is contained within the product itself. Just connect the logger to your PC or Mac with a USB cable, open any web browser and in the address bar type “http://EasyLog.local”. No internet connection is needed, and you can save this address in your bookmarks or favourites as normal.


The interface is easy to use and allows the following parameters to be configured:


  • Logger and channel names
  • Measurement units Logging rate and start mode
  • Up to 16 separate alarms (high/low/pre-alarm/cumulative) with thresholds, delay and hold
  • Display and LED indicator modes


Once the logger is running, you can plug it back into your computer and see the latest data, device status and the event log. You can also choose to stop the logger and change the configuration, or just let it continue logging.

Calibration Options

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (Temperature / Humidity) Price
Issued at 4 points: 20°C & 30°C (Temp)
35% & 75% @ 20°C (Humidity)
£80.00
Additional points available from: From 0°C to 50°C
From 30% to 95%RH
£5.00 (Temp)
£15.00 (Humidity)
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
Traceable Calibration (Temperature / Humidity) Price
Issued at 5 points: 2 x Temp; 20°C & 30°C (Temp)
3 x %RH; 35%, 55% & 75% @ 20°C
£88.00
Additional points available from: From 0°C to 50°C
From 30% to 95%RH
£5.00 (Temp)
£15.00 (Humidity)
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
UKAS Calibration (Temperature / Humidity) Price
Issued at 4 points: 20°C & 30°C (Temp)
35% & 75% @ 20°C (Humidity)
£116.40
Additional points available from: 5°C to 50°C / 25% to 95%RH £10.00 (Temp)
£25.00 (Humidity)

A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.

You may also like

Recently viewed