The AEL-USB1PRO data logger can measure and store up to 32,510 temperature readings. Simply download the stored data directly to your PC or laptop’s USB port. With a 316 stainless steel outer shell this data logger is corrosion resistant, impact resistant and waterproof. The 3.6v battery provides power for up to 3 years giving this data logger a truly long life.
The AEL-DataPad allows users of AEL-USB data loggers to configure loggers, download data, and view logging results on-the-spot, rather than removing the logger from the environment being measured and taking it to a PC. Click here to view the DataPad.
-40° to 125°C x 0.1°
Waterproof 316 stainless steel case
Environmental protection to IP-67 / NEMA4X
USB interface for set-up and data download
Set-up allows the user to select logging rate, start time, alarm limits and logging mode
User selectable logging intervals – min 1 sec, max 12 hours
Data logging up to 32,510 readings
Non-standard lithium battery rated for high temperature exposure
In the event of battery failure the logged information is held until new batteries are inserted
Analysis software with graphical display of data – total readings, zoom facility to individual readings and visual indication of alarm levels
Supplied with software and replaceable high capacity lithium battery
A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.
Traceable Calibration (Logging)
Price
Issued at 4 points:
-10°C, 5°C, 20°C & 40°C
£48.00
Additional points:
From -15°C to 50°C
£5.00 per point
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
UKAS Calibration (Logging)
Price
Issued at 4 points:
5°C, 15°C, 25°C & 40°C
£132.00
Additional points:
From 5°C to 50°C
£15.00 per point
A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.
