6000 Count Digital Multimeter with Temperature

SKU: ADM-931
filler

Description

The ADM-931 digital multimeter is suitable for use by electricians, electronic engineers, general industry and laboratories. They are EN61010-1 CAT III 600V, CATII 1000V rated. A large high-contrast LCD display, a single positive action rotary selection and only 4 function buttons make them easy to use.

  • Impact-resistant rubber and ABS plastic case with a flip out desk stand
  • 34mm LCD display with large digits, 61 segment bargraph and function indicators with backlight
  • Measuring rate of 2 times per second
  • Auto polarity indication
  • Auto ranging with range hold
  • Data hold
  • Min/max recording mode
  • Fast blow fuse for overload protection
  • Operating environment 0°C to 50°C at <70%RH
  • Temperature
  • Low battery indication
  • Supplied with soft zip carry pouch, 2 test leads, K-Type temperature bead probe and battery

Technical Specification

Function Range Basic Accuracy Max Resolution
DC Voltage 1000V ±0.5% of rdg ± 2 digits 0.1mV
AC Voltage 1000V ±1.2% of rdg ± 3 digits 1mV
DC Current 10A ±2.5% of rdg ± 5 digits 1mA
AC Current 10A ±3% of rdg ± 5 digits 1mA
Resistance 60MΩ ±1.2% of rdg ± 4 digits 0.1Ω
Capacitance 4000µF ±5% of rdg ± 50 digits 10pF
Frequency 10MHz; ±1.5% of rdg ± 5 digits 0.001Hz
Temperature 760°C, 1400°F ±3% of rdg +5ºC 1°C
Diode Test Open circuit voltage 1.5V DC typical;test current 0.3mA
Continuity Theshold <100Ω
Dimensions 150 x 70 x 48mm
Weight 255g

Calibration Options

A calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below.

Traceable Calibration (Multimeter) Price
£55.00
Traceable certification is adequate for most applications and meets the calibration requirements of ISO 9001. All measurements contained in this type of certification are traceable back to National UKAS Standards.
Traceable Calibration (UKAS) Price
£71.00

A UKAS calibration can also be considered traceable. The difference between the two is that UKAS calibrations are carried out under the remit of an ISO/IEC 17025 quality system by a laboratory that has been accredited by UKAS, to ensure the consistency and accuracy of results.

Product Downloads

You may also like

Recently viewed