If you are here you are probably interested in purchasing our Pt100 Thermometer over at the ATP store or have just read one of our guides over at our blog and are wanting to know more about Pt100 probes options. So let’s get you informed. Important Note: This guide presumes you are purchasing a custom probe for the ATP Pt100 Thermometer. This means certain assumptions have already been made to the specification of the probe/unit. Sensor Type: 3 wire RTD - Flat Film Detector with a Lumberg KFV60 connection. Probes ordered may not be compatible with other Pt100 devices.
Step 1: Identify the type of probe needed via your application
- Air Probe
- Penetration Probe
- Immersion Probe
- Surface Probe
- Mineral Insulated Probe
Pt100 probes can be ordered in a variety of styles designed for different applications. Air probes for measuring gases, penetration probes for semi-solids and liquids. Immersion probes for liquids and surface probes for surface contact measurement. Mineral insulated probes are excellent when the probe need to be shaped to fit. As standard we supply a selection of Air and penetration probes but a bespoke probe can be constructed to match your exact application.
Step 2: Choose the Class of Probe Needed
- Class B
- Class A
- 1/3 DIN
- 1/10 DIN
Pt100 probes can be ordered in a variety of classes that affect the overall accuracy of the unit. Our guide on Pt100 Accuracy and Probe Classification will enable you to make an informed decision. Generally speaking, Class B is suitable for most industrial applications whist 1/10 DIN is regularly used as a reference thermometer, a replacement for mercury thermometers or in laboratories. But you may find something in between more suitable.
Step 3: Pick your probe length and diameter
For most applications the exact length and diameter of your probe will be inconsequential. However, some set-ups, such as applications where mercury thermometers were inserted require very specific lengths and diameters. Our standard probes measure 100 to 150mm by 3.2mm diameter, however, you can get yours to any specification you would like.
Step 4: Pick your cable style
If your getting a custom probe, why not go the whole hog. As standard we provide a 1m coiled cable to connect your probe to the Pt100 unit. But you can get this as long or short as you would like, straight or coiled. Take your pick.
Step 5: Give us a call and get your free quotation
Once you know what you want, give our sales team a call on 01530 566800 or email email@example.com and we will get back to you with your bespoke solution as soon as possible.